New driver USB on my laptop Portege of loading

Similar Questions

• I have announced a new drive hard into my laptop so i that no picture can now connect you and try to get my pictures back

  I have announced a new drive hard into my laptop but I lost my pictures is possible that I can recover by logging into the windows photo gallery

  When you replaced the hard drive, everything that was in the old man disappeared. Of course, because he's gone.

  Reinstall your photos from the backup that you made before you replaced the hard drive. Oh, you save all of your date? Oops!

• problem with driver usb controller pavilion g7

  I need driver usb controller pavilion laptop g7

  PCI\VEN_184B103C & REV_03\3 & 2411E6FE & 1 & 80

  PCI\VEN_184B103C & REV_03\3 & 2411E6FE, 1 & 81

  Hello:

  You must install the AMD chipset driver and reboot.

  You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

• Inspiron 1545 - hard drive replacement, new drive SATA not found 'internal hard drive not found ".

  Hi all

  I'm trying to install Win7 in an Inspiron 1545 with a new SATA hard drive that has been purchased. When I insert the disc, I get "Internal hard drive not found." I checked the drive does not appear in the BIOS, I already tried to reinstall the drive several times. In addition, I tried to load the chipset drivers, drivers SATA, etc. of the Dells, the Reader site still does not appear in the installation of the OS when starting on a DVD or in the bios.

  I do not think that there is a problem with the new drive, I plugged the new drive in another Dell laptop model and it recognizes the drive in the BIOS, also I can always start on the previous in this laptop without problem hard drive when I plug it in.

  Is there a specific driver, etc. should I use for the drive to be recognized or have other thoughts?

  It's strange - either the new HDD has a rare compatibility with your embedded controller problem (I use a 500Gbyte in my 1545 no probs)) or it is a mechanical problem. I look at the physical dimensions and compare your original hdd by the new. Watch the video (even if it's on a 1525 (similar to a 1545) and a SSD hard drive)-go to 02:20

  cs_setInnerHtml ('video_a3a3072d-f294-4bec - 85b 6 - 1eefb7b19e68', ");

• Computer laptop (Vista) does not take account any new working USB external hard drive

  Hello, I'm under the latest version of Windows Vista Edition Home Premium on a Dell XPS M1210 and spin in the problems with the connection of my second USB external hard drive. In other words, when I plug the drive (a Seagate expansion 1 TB), nothing happens. Literally nothing, no notification of installation of the driver, no sound is played stating that the system recognized the device, no new entry in post working or disk management. I connected this drive on another computer running Windows 7 and it worked without a problem, so I do not suspect the problem to lie in the hard drive, but with my computer. My other external hard drive USB, a Maxtor Basics Portable 250 GB, works perfectly, but there more than two years. I bought the 1 TB Seagate as a backup and an upgrade, but I plan to go back now that there is nothing more than a big black Clipboard with a green LED clear too much room. What can I do about it?

  Hello
   
  Most likely, there is not enough power for the USB port of your machine to the external device do recognize. As a test I would have you test the issue on another USB plug.
   
  I recommend you contact you either OEM (Original Equipment Manufacturer) or the manufacturer of the motherboard if it is a machine of casting House and get the latest chipset drivers for your motherboard.
   
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Aziz Nadeem - Microsoft technical support.

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Connection cricket MSGM8 phone USB on my laptop (running Windows XP Pro) run the Add New Hardware Wizard, but cannot find drivers

  Original title: badminton MSGM8 phone to the USB port on my laptop to pis draft.exe

  connecting a phone to cricket MSGM8 USB on my laptop (running Windows XP Pro) run the Add New Hardware Wizard, trying to locate the software for Qualcomm CDMA Technologies MSM, but can not find the drivers, any fix?

  Hi ChristopherStout,

  (1) what is the complete error message you receive?

  (2) is limited only to Cricket MSGM8 phone?

  Method 1: Run the fixit available in the article below and then check if it makes a difference

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive
  http://support.Microsoft.com/kb/925196

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  Method 2: If you provided drivers\software disc from the manufacturer of the computer, go ahead and install it.  You can see the steps outlined in the article below

  How to troubleshoot unknown devices listed in Device Manager in Windows XP
  http://support.Microsoft.com/kb/314464

• I got a new hard drive installed in my laptop. The difficulty to reconnect my printer.

  Recently, my computer crashed and I had to have a new hard drive installed.  When she came back to me I found that my printer to be connected to my laptop.  I tried to use the disc that I used when I purchased the printer.  But now, with this new hard drive, I need to connect to the printer to my laptop once again, and I have a problem that I can't fix it.  Please can someone explain what I need to do?

  Thank you.

  From Internet Explorer

  Original title: I got a new hard drive installed in my laptop. I need to reconnect my printer with my laptop - problems with this. Help, please.   

  Hi Jessie,.

  Unplug the printer first. Insert the Driver CD for the printer. install by clicking on Setup. continue when asked to connect the printer and connect the USB cable to the laptop. There is not any question...

• My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

  My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

  Time Machine backup to a sparsebundle.

  The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

  Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

  You has of course set the exclusion in Time Machine?

  By default, Time Machine will exclude your second drive unless you have included it. Did you?

  Once you get to this level during the backup, you can do a full restore manually whenever you want.

• I was getting a new hard drive to my HP laptop. Since I have a key for Windows Vista from the purchase of the laptop, how can I get the disk to re install the operating system?

  I was getting a new hard drive to my HP laptop. Since I have a key for Windows Vista from the purchase of the laptop, how can I get the disk to re install the operating system?

  original title: reinstall Windows Vista

  I was getting a new hard drive to my HP laptop.  Since I have a key for windows vista from the purchase of the laptop, how can I get the disk to re install the operating system?

  Contact HP (if they had not initially you provided with support or the media manufacturing process or you have lost the media and/or you don't want EU to some tools to clone the old drive to the new or can not do...) for a copy of the media restore/recovery of your system.

  http://www.ZDNet.com/blog/Bott/lost-your-Windows-discs-how-to-get-replacement-media-legally/4320?PG=3

• New external USB 500 GB Portable Hard Drive appearing is not in Windows Vista

  I connected a new 500G portable hard drive to a front USB port on my HP PC (with an AMD Phenom X 4 image processor), under Windows Vista Home Premium. Windows presented a pop saying that the driver has been installed, then he said: USB device installed. The software of the device has been installed successfully and is ready for use.

  However when I looked for the drive in Windows Explorer it wasn't there. I read in this forum, and using the information that I realized that I accessed the computer on my PC management - up it only shows C: drive and D: drive image factory, but below that, when disk 0 is assigned to the C: and D: drives it shows disk 1, unknown, uninitialized. Assuming that it is the car in question, I tried to initialize the disk, but then the error FUNCTION INCORRECTE.

  I don't know what to do at this point. If the player has not been assigned a letter, there seems to be no way to transfer or partition.

  A new drive must be formatted. That is why it is sjowing up as disc 1, unknown, uninitialized.

• How can I get a new vista drive came with my laptop?

  Hello I have a problem. My computer has been infected by spyware 2 weeks ago and I decided to reformat my computer from windows Vista to Windows 7 now, I realized that I need to get windows 7 on my computer and want vista back but the disk I had received with this laptop is broken. I have a product key for Vista and I wonder where and how do I get a new drive, because I will not buy a new system, when I have a key product for vista, but can not use it?

  Please please help me

  Contact the manufacturer and they should be able to provide a set of recovery disc (for a small fee) which allows to re - install Vista and your computer to the original factory conditions.  If you are past since the initial purchase, to mention this and they may be able to provide records with the appropriate operating system (although I'm not sure that they can or will do it and if you have a product key upgrade, rather than a full installation product key, you will not be able to activate with this key (unless made one update-so be sure what you want to do is possible before you spend the money).

  If you know someone with a real Installation of Vista on the same size disc of the bit, then you can borrow it and that allows to install Vista and use your product key to activate it assuming that your product key is designed for a complete installation, not an upgrade (and select the version appropriate to install).  You can then copy this disc in case you need it again.  If your product key is an upgrade version, then you must first re - install the original operating system, enable it to using the product key, and then improve it with the disk and use your Vista key to activate the upgrade.

  There is no place for a drive or a free download of Vista.  Above are your options.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Pavilion dv6 - 6 c 10: HP laptop Pavilion dv6 - 6 c 10 usb 3 does not. Where download driver USB 3?

  Two of my pavilion laptop dv6 - 6 c 10 3 USB ports do not work. It is currently running Windows 7 Home Premium 64-bit. There are 2 yellow flaged "Controllers USB" items listed under "Other devices" in Device Manager screen. However, there is no controller driver USB 3 on the support page available as a download for HP Pavilion dv6 laptop - 6 c 10us. Pls advise. Thank you.

  Morris Lam

  [personal information]

  Hello:

  See if the chipset directly from AMD driver installation works for you... first driver on the list...

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

• When I reinstall El Capitan on a new drive, should I install device drivers?

  I am completely new to the Mac, after using Windows all my life.

  My question is; I'll put a new, larger internal SSD in my MacBook Pro and of course re - install El Capitan.  I need to download and install device drivers, as you do with Windows machines?

  In addition, my MacBook Pro is 8 years old and the battery is endangered.  How a new battery will be?

  N ° OS X contains everything that is needed. You have a project in front of you. But see the following:

  How to replace or upgrade a drive in a laptop

  Step 1: Fix the hard disk and permissions

  Boot from an OS X install disc

  1. Insert the OS X installation disc into the optical drive.

  2 restart the computer.

  3. immediately after the ring, press and hold the C"" key.

  4 release the button when the spinning gear under the Apple grey dark

  logo appears.

  5. wait for the installer to finish loading.

  Boot from a recovery HD:

  1. reboot the computer.

  2. immediately after the ring, press and hold the

  'ORDER' and the set of keys 'R '.

  3. release the keys when appears the utilities Menu.

  After the installer loads, choose your language and click on the button continue. When the menu bar appears, select disk utility from the menu of the Installer (the menu utilities for Tiger, Leopard or Snow Leopard).

  For Lion or later select disk utility in the main Menu of public services.

  After disk utility loads select your entry from hard drive (to mfgr. ID and Player size) of the list on the left.  In the disk utility status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  If Disk utility reports errors, that it can not solve, then Disk Warrior or Tech Tool Pro to repair the drive. If you do not have one of them or none of them can fix the disc, then you will need to reformat the hard drive and reinstall the OS X.

  Second stage: Remove the old drive and install the new drive.  Place of the old drive in an external USB enclosure.  You can buy one at OWC , which is also a good supplier for the readers.

  Step 3: boot from the external drive.  Restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager appears.  Select the icon of the HD to the external hard drive recovery, and then click the arrow pointing down.

  Fourth step: new preparation of the hard drive

  1. open utility disk in the utility Main Menu, then click on the continue button.

  2. the disk utility charges and then select your new hard drive (it's the entry with the)

  MFGR. ID and size) from the list on the left. Note the SMART status of

  the reader in the status area of THE.  If it says not "verified" and then the player

  is failing or has failed and will need replacement.  Otherwise, click on the

  Tab in the main window of the disk utility partition .

  3. in the title of the Volume entitled plan defined the number of partitions from

  the drop to one. Set the type of Mac OS Extended format

  (Journaled). Click the Options button, set the partition scheme

  GUID then click on the OK button. Click on the Partition/apply button and

  Wait until the process is completed.

  4. Select the volume you just created (it's the auxiliary input under the)

  entry by car) from the list on the left. Click on the Erase tab in THE MAIN

  window.

  5. set the type of format Mac OS extended (journaled). Click on the

  The button options , check the box for zero data and click OK to

  return to the window to erase it.

  6. click on the delete button. The formatting process can take up to several

  hours depending on the size of the disk.

  Fifth step: clone the old disk to the new disk

  1. Select the destination volume in the list on the left.

  2. click on the tab restore in the main window of THE.

  3. check the box labeled destination Erase.

  4. Select the destination volume in the left list and drag it to the

  Destination entry field.

  5. Select the volume of the source of the list on the left and drag it to the

  Input source field.

  7. check you correctly, then click on the restore button.

  Destination means the new internal drive. Source means the old external drive.

  Step 6: open preferences Startup disk and select the new internal volume.  Click restart.  You should boot from the new drive.  Eject the disk and disconnect it from the computer.

• the upgrade of my hard drive on an hp laptop. How to create a windows cd? KeyCode on laptop wallpaper

  the upgrade of my hard drive on an hp laptop.  How to create a windows cd?  KeyCode on laptop wallpaper

  You n "t do it this way.

  You use cloning software to clone your existing to the new disk drive.  For portable computers, you will need to purchase an external hard drive enclosure which is (a) compatible with your drive (SATA or PATA) interface and (b) compatible with external connections on your laptop (for example, USB, FireWire, eSata).  Do not spend a lot of money for this speaker ($ 10-$ 20).

  If your new hard drive Western Digital, you can get the free cloning (a 'special' version of Acronis True Image) of WD software (http://support.wdc.com/product/downloaddetail.asp?swid=119) or you can get it separately (this is not an exhaustive list and is in no particular order):

  Acronis True Image Home 11
  EASEUS ToDo Backup
  Paragon Drive Copy or Partition Manager Personal
  Casper
  Norton Ghost

  The process is simple:

  1. Install the software on your laptop for cloning
  2. RTFM (do not skip this step)
  3. Install the new drive in the external case
  4. Connect new player to the computer
  5. Clone original disc on new drive
  6. Stop
  7. Unplug the external computer case
  8. Exchange records (original for external disk) and the new laptop drive
  9. Reboot and enjoy your new drive.

  When you know that the cloning operation was successful, format the old drive, which is now in the external case and use it for backup of data.

• How to install windows on the new drive?

  Hello

  I have a HP Pavilion dv7-3080, which came with Windows7. Now, I bought a 120 GB SSD. I tried to install Windows on the SSD by selecting Factory Reset. However, I get the message that the size of the hard drive has changed and that's why I can't use Factory Reset.

  Is there a way how can I use the Windows7 that came with my laptop and install this on my new drive!

  To my knowledge, I am not break everything right since Windows7 came with the laptop and was part of the price I paid for the laptop.

  Kind regards

  Sja785

  Hello:

  Partitions or recovery discs do not work on a smaller hard drive.

  You need to install a simplified version of windows 7 on your SSD. You will not break the laws or rules of license by using the product key on the bottom of the PC to activate the installation.

  However, if you can not read all 25 characters of the product key you are flat out of luck and will have to buy a new operating system.

  Here's how to make your own simple Windows 7 installation disc if you have not already.

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul